2Pcs G1/2" Water Flow Hall Sensor Switch Flow Meter Flowmeter Counter 1-30L/min

Description

Description:
The water flow sensor is mainly composed of a plastic valve body, a water flow rotor assembly and a Hall sensor.
It is installed at the water inlet end of the water heater to detect the flow of water. When the water passes through the water flow rotor assembly,
The magnetic rotor rotates and the speed changes with the flow rate, the Hall sensor outputs corresponding pulses
The signal is fed back to the controller, and the controller judges the size of the water flow and regulates it.
1. This product has a light and convenient appearance, small size, and easy installation.
2.The impeller is inlaid with stainless steel beads, which is always wear-resistant.
3. Circuit and water isolation design.
4. The Hall element is imported, and the valve body is made of transparent material for better observation of water flow and rotor conditions.
5. All raw materials meet ROHS testing standards
Features:
Brand new and High quality
Materials  meet the ROHS testing standards
Water pressure resistance: > 1.75MPa
Operating voltage range: DC 5~18V
max operating current:15ma
Insulation resistance: > 100MΩ
Accuracy: 1-30L\MIN ±10%
Flow pulse characteristics: (5*Q)Q= L/Min±3%
out put signal: Square wave
Output pulse duty cycle: 50%±10%
Output pulse high level: > DC 4.7V (input voltage DC 5V)
Output pulse low level:
Frequency: F = 5 * Q (L / Min)
Note:
1. Severe impact and chemical erosion are strictly prohibited.
2. Throwing or collision is strictly prohibited.
3. The temperature of the medium should not exceed 100 degrees.
4. The use current shall not exceed 10mA
red- power supply positive
yellow - signal output
black- power supply negative.
Package:
1pcs x G1/2" Clear Flow meter sensor